40mm Formula 4x4 ReadyStrut Lift Kit to suit Nissan Navara NP300 Series 3 & 4 2018-2022
After you have purchased this lift kit, someone from our team of suspension experts will call you to confirm your order details, your requirements, and your vehicle specifications.
- Low Pressure Nitrogen for fade free performance
- Designed and built for Australian conditions
- Tested fitted and supported by 4WD Action
- SuperPro Hybrid bushings on all Front Struts
- Specifically designed for each application
- Valve coding to suit differing spring rates
- Comfortable yet heavy duty 4WD Lift Kit
- Big Bore design for improved heat dissipation
- Tapered pegs on Front Struts for increased strength
- Unlimited Kilometer warranty.
- Includes upper control arms
Formula 4x4 Enhancement ReadyStrut Lift Kitdesigned to lift the vehicle 40mm and provide the ultimate in handling and control, both on and off road.
For 2014-2017 NP300’s, this lift kit will produce ~30-40mm lift front and rear.
For 2018-On NP300’s, this lift kit will produce ~30-40mm lift at the front. The original equipment rear springs are approx. 25mm higher than the earlier models, so when raised you may only see a small lift at the rear, however this will serve to level the vehicle.
If you would like to lift your NP300 and get the best drive performance, this lift kit will do this. We highly recommend adding SuperPro control arms to allow optimal wheel alignment, maximising handling, stability, and tyre life.
By adding SuperPro part TRC008-6, a further 10mm of lift and down travel can be added to the front suspension. This will only raise your front suspension and not the rear, so it can be used to trim the chassis angle of the vehicle.
Due to the limited down travel of the NP300’s front suspension, it is not recommended to lift the front suspension more than 40mm from the factory ride height. For more than 40mm of lift, longer shock absorbers, aftermarket upper control arms and extended bumpstops are required.
Where applicable the spring rates of this lift kit can be adjusted to handle different front and rear loads. If you would like to change the specified spring rates of this lift kit, please give us a call, send us a message or leave a comment when you purchase this 4x4 lift kit.
