CALL 03 62294791
SMS 0483930520
2 Inch 50mm Bilstein B8 5100 4x4 Lift Kit to suit Ford Ranger PY, P703 & VW Amarok T1A, T1B 2022-on 6 Cylinder
After you have purchased this lift kit, someone from our team of suspension experts will call you to confirm your order details, your requirements, and your vehicle specifications. All to ensure that we give you the right product. If you purchase this lift kit using our click and fitment service we will confirm your installation date at the same time.
High Level Product Details
Bilstein Performance Kit designed to lift the vehicle 45-50mm and provide the ultimate in handling and control, both on and off road.
Where applicable the spring rates of this lift kit can be adjusted to handle different front and rear loads. The front height can be adjusted to suit different applications. To increase load carrying capacity in the rear, it is recommended to install airbags. If you would like to change the specified spring rates of this lift kit, please give us a call, send us a message or leave a comment when you purchase this 4x4 lift kit.
The BILSTEIN B8 5100 Offroad shock absorber is a high-performance shock absorber designed specifically for offroad driving.
It features a monotube design and patented digressive valving that is uniquely suited to handle the extra demands placed on shock absorbers by lifted vehicles.
The gas pressure technology used in the B8 5100 ensures consistent performance in all conditions, and the shock absorber has been extensively tested and fine-tuned to improve handling performance.
The kit includes front and rear dampers, as well as front and rear springs and all parts required to install this kit.
The springs lift the front of the vehicle by approximately 45mm and the front shocks have 5 spring seat heights for adjustment.
- 5 Spring seat height adjustment for the front springs
- BILSTEIN gas-pressure technology provides maximum traction, precise handling and safety
- Patented digressive valving instantly reacts to changing surface conditions
- Optimum grip and enhanced lane stability in day to day and extreme situations
- Proven in harsh Australian outback conditions
- Repairable & Revalveable
- OEM certified mounting hardware allows for easy installation
- Restores original ride characteristic
- Individually fine-tuned during BILSTEIN road testing
- Enhanced safety
- Precision handling for optimized vehicle control
- Constant damping power under any load
- 3 year / 60,000km warranty. Learn more here.
Bilstein Lift Kit Warranty
Bilstein lift kits come with a 3 year / 60,000 Kilometer warranty. Just activate your warranty online
Bilstein Performance Kit designed to lift the vehicle 45-50mm and provide the ultimate in handling and control, both on and off road.
Where applicable the spring rates of this lift kit can be adjusted to handle different front and rear loads. The front height can be adjusted to suit different applications. To increase load carrying capacity in the rear, it is recommended to install airbags. If you would like to change the specified spring rates of this lift kit, please give us a call, send us a message or leave a comment when you purchase this 4x4 lift kit.
The BILSTEIN B8 5100 Offroad shock absorber is a high-performance shock absorber designed specifically for offroad driving.
It features a monotube design and patented digressive valving that is uniquely suited to handle the extra demands placed on shock absorbers by lifted vehicles.
The gas pressure technology used in the B8 5100 ensures consistent performance in all conditions, and the shock absorber has been extensively tested and fine-tuned to improve handling performance.
The kit includes front and rear dampers, as well as front and rear springs and all parts required to install this kit.
The springs lift the front of the vehicle by approximately 45mm and the front shocks have 5 spring seat heights for adjustment.
- 5 Spring seat height adjustment for the front springs
- BILSTEIN gas-pressure technology provides maximum traction, precise handling and safety
- Patented digressive valving instantly reacts to changing surface conditions
- Optimum grip and enhanced lane stability in day to day and extreme situations
- Proven in harsh Australian outback conditions
- Repairable & Revalveable
- OEM certified mounting hardware allows for easy installation
- Restores original ride characteristic
- Individually fine-tuned during BILSTEIN road testing
- Enhanced safety
- Precision handling for optimized vehicle control
- Constant damping power under any load
- 3 year / 60,000km warranty. Learn more here.
Bilstein Lift Kit Warranty
Bilstein lift kits come with a 3 year / 60,000 Kilometer warranty. Just activate your warranty online
Lift Kit Fitting Instructions
All lift kits are come with a set of lift kit fitting instructions. The instructions provided are general in nature. It is highly recommended that you get your lift kit installed by a mechanic or suspension technician, preferably with wheel alignment facilities.
Why can’t I reuse my U-bolts?
This is one of the most commonly asked questions when discussing leaf springs and related components. With the kit will always provide you with the correct u-bolt.
This Lift Kit and its Height Variations
Suppliers are often not open about this topic from the initial purchase. However, at TJP Auto
& 4x4 we believe in honesty and providing customers with all the information relevant to their purchase. The below is not exclusive to TJP Auto & 4x4, every brand of lift kit and every company that sells lift kits understands the below and works through it.
In the title of this lift kit a specific height increase is referenced. Although this is accurate, due to the complicated nature of suspension and numerous varying factors between each vehicle, such as accessories, factory ride height, sag due to age, use and pre-existing conditions. There will always be a tolerance for the final lift height increase that your 4WD receives both front and rear may vary to the one listed in the products title.
If we are provided with all the correct constant load details and we supply the correct springs. Your 4WD will get the correct lift height, within tolerance of as advertised. However due to external factors the tolerance my vary as much as + or – 15mm.
External factors that affect lift heights
- On top of our engineering, we have installed this lift kit on thousands of 4WD’s across Australia and each with various setups. This has given us the data to determine the average lift height increases. The height increase referenced in the title of this lift kit is based on that average number.
- If the vehicle has sagged already due overloaded springs caused by age, use and accessory installation. Then lift height change will likely be greater than the one listed in the products title. However, even with pre-existing sag the lift will take the vehicle back to OE ride heights + the increased lift mentioned.
- Every vehicle that comes off the factory floor has a tolerance variation in factory ride heights. Therefore, the final before and after measurements, both front and rear will always be different from vehicle to vehicle. Which means that even though this lift kit specifies a specific lift height in the title, due to the varying standard ride heights of each vehicle the lift you may receive will vary.
- If you do not provide our team with the correct info then we will not be able to supply you with the corrects springs, which will affect the lift height increase. Be sure that when our team reaches out to confirm all details you give them all info required.
Springs & Lift Heights
Regarding the below, when you are order a lift kit from TJP Auto & 4x4. Our suspension experts will call you to confirm all details and requirements before processing your order. We do this to make sure you get the best service and the best lift kit for your 4WD. Don’t stress about the finer details as we will take care of it. However, we note the below so you can understand the complexity.
As springs are what lift your 4WD, to ensure you get the correct height increase (lift) it is paramount that we supply the correct springs for your 4WD’s constant loads and intended use.
Although all lift kits specify a specific lift height in the title. As your 4WD has front and rear springs this means you will have a front lift height and a rear lift height. The spring rates we supply in this lift kit are determined by the weights you carry, a suspension height increase.
Keep in mind that both the front & rear springs work in conjunction with one another. If spring rate for either the front or rear is wrong, this could cause an uneven lift. Making the vehicle nose down or nose up which is not the outcome we want. So after purchasing when talking to our suspension experts, be certain to provide our team with as much info as possible in regards to the vehicles use and also constant loads.
To get the correct springs for your car, you must match your vehicles constant load/weight to the correct spring rates. For example, if you carry 250kgs you should get a spring that best matches that load.
We recommend you get all your constant load accessories sorted before you get a lift kit installed, this will ensure you have a level lift and the best ride from the get-go and wont require future spring changes. A ‘constant load’ is the accessories/gear that will be installed or in the vehicle 24/7.
You do not want to get a spring that is rated less than the load you carry at constant. If you do this, you will overload your spring and it will sag/fail. You can overload a spring by carrying too heavy of a load (front/rear) or by towing a boat caravan that adds extra weight to the tow ball. For example, if you have a 300kg rated rear spring but load your rear to 500kg, then your rear spring would fail and sag. The same applies to the front, with various engines and accessories having different weights such as alloy bull bar, steel bull bar, bumper bars, steel winch, synthetic winch, bash plates, tow hook, batteries, diesel engine, petrol engines, etc.
The flipside to the above, is that you do not want to get a spring that is rated too high for what you carry at constant. For example, you do not want to get a spring that is rated to 300kg if you only carry 100kg constantly. If you do this you will have a very stiff ride and it could lead to suspension failure such as shock top outs, coil spring trap issues and more.
If you are carrying any dynamic load, including extra load on the weekends, or tow anything. Then you will need an airbag kit to help. Airbag kits are designed specially not to carry weight but to help support your springs to handle any extra weight you may carry occasionally, like a boat, caravan, camper, trailer, or general load increase.
Again, please don’t stress too much about the above. As, after you order this lift kit, our suspension experts will call you to make sure you get the right kit, by confirming all your vehicle details and requirements.
If you have any questions, before you make a purchase. Please use our online chat or call us.
Suits
FORD AUSTRALIA
RANGER
2022-on PY, P703 4WD
FORD AUSTRALIA
RANGER
2022-on PY, P703 Raptor 4WD
VW
AMAROK
2022-on T1A, T1B 4motion
Suppliers are often not open about this topic from the initial purchase. However, at TJP Auto
& 4x4 we believe in honesty and providing customers with all the information relevant to their purchase. The below is not exclusive to TJP Auto & 4x4, every brand of lift kit and every company that sells lift kits understands the below and works through it.
In the title of this lift kit a specific height increase is referenced. Although this is accurate, due to the complicated nature of suspension and numerous varying factors between each vehicle, such as accessories, factory ride height, sag due to age, use and pre-existing conditions. There will always be a tolerance for the final lift height increase that your 4WD receives both front and rear may vary to the one listed in the products title.
If we are provided with all the correct constant load details and we supply the correct springs. Your 4WD will get the correct lift height, within tolerance of as advertised. However due to external factors the tolerance my vary as much as + or – 15mm.
External factors that affect lift heights- On top of our engineering, we have installed this lift kit on thousands of 4WD’s across Australia and each with various setups. This has given us the data to determine the average lift height increases. The height increase referenced in the title of this lift kit is based on that average number.
- If the vehicle has sagged already due overloaded springs caused by age, use and accessory installation. Then lift height change will likely be greater than the one listed in the products title. However, even with pre-existing sag the lift will take the vehicle back to OE ride heights + the increased lift mentioned.
- Every vehicle that comes off the factory floor has a tolerance variation in factory ride heights. Therefore, the final before and after measurements, both front and rear will always be different from vehicle to vehicle. Which means that even though this lift kit specifies a specific lift height in the title, due to the varying standard ride heights of each vehicle the lift you may receive will vary.
- If you do not provide our team with the correct info then we will not be able to supply you with the corrects springs, which will affect the lift height increase. Be sure that when our team reaches out to confirm all details you give them all info required.
Regarding the below, when you are order a lift kit from TJP Auto & 4x4. Our suspension experts will call you to confirm all details and requirements before processing your order. We do this to make sure you get the best service and the best lift kit for your 4WD. Don’t stress about the finer details as we will take care of it. However, we note the below so you can understand the complexity.
As springs are what lift your 4WD, to ensure you get the correct height increase (lift) it is paramount that we supply the correct springs for your 4WD’s constant loads and intended use.
Although all lift kits specify a specific lift height in the title. As your 4WD has front and rear springs this means you will have a front lift height and a rear lift height. The spring rates we supply in this lift kit are determined by the weights you carry, a suspension height increase.
Keep in mind that both the front & rear springs work in conjunction with one another. If spring rate for either the front or rear is wrong, this could cause an uneven lift. Making the vehicle nose down or nose up which is not the outcome we want. So after purchasing when talking to our suspension experts, be certain to provide our team with as much info as possible in regards to the vehicles use and also constant loads.
To get the correct springs for your car, you must match your vehicles constant load/weight to the correct spring rates. For example, if you carry 250kgs you should get a spring that best matches that load.
We recommend you get all your constant load accessories sorted before you get a lift kit installed, this will ensure you have a level lift and the best ride from the get-go and wont require future spring changes. A ‘constant load’ is the accessories/gear that will be installed or in the vehicle 24/7.
You do not want to get a spring that is rated less than the load you carry at constant. If you do this, you will overload your spring and it will sag/fail. You can overload a spring by carrying too heavy of a load (front/rear) or by towing a boat caravan that adds extra weight to the tow ball. For example, if you have a 300kg rated rear spring but load your rear to 500kg, then your rear spring would fail and sag. The same applies to the front, with various engines and accessories having different weights such as alloy bull bar, steel bull bar, bumper bars, steel winch, synthetic winch, bash plates, tow hook, batteries, diesel engine, petrol engines, etc.
The flipside to the above, is that you do not want to get a spring that is rated too high for what you carry at constant. For example, you do not want to get a spring that is rated to 300kg if you only carry 100kg constantly. If you do this you will have a very stiff ride and it could lead to suspension failure such as shock top outs, coil spring trap issues and more.
If you are carrying any dynamic load, including extra load on the weekends, or tow anything. Then you will need an airbag kit to help. Airbag kits are designed specially not to carry weight but to help support your springs to handle any extra weight you may carry occasionally, like a boat, caravan, camper, trailer, or general load increase.
Again, please don’t stress too much about the above. As, after you order this lift kit, our suspension experts will call you to make sure you get the right kit, by confirming all your vehicle details and requirements.
If you have any questions, before you make a purchase. Please use our online chat or call us.
Suits
| FORD AUSTRALIA | RANGER | 2022-on PY, P703 4WD |
| FORD AUSTRALIA | RANGER | 2022-on PY, P703 Raptor 4WD |
| VW | AMAROK | 2022-on T1A, T1B 4motion |
